Total solution provider about development・manufacture・consulting・education・maintenance of sterilizer, washing equipment, etc.

＜Features＞

• This spray method has not resulting temperature difference in the tray.So, keep the temperature uniformity.
• Take off the punching hole at the bottom tray to avoid any temperature difference in upper and lower tray.
• Operate Indirect heating and indirect cooling by heat exchanger.
• Heating and pressurization are proportional control.
• Saving the space with angle can body type.

＜Use＞

• Cooking, sterilization and heating test of the retort food, canned, beverage cans
• Heat and pressure resisting・transformation test of the retort pouch, canned, PP vessel and various packaging, etc.

＜Features＞

• You can select heated water shower sterilization・hot water sterilization・steam sterilization.
• You can select shower cooling・transposition cooling・collection cooling・circulation cooling・natural cooling.
• You can set up F value and C value. So, you can get the best data by equipment.
• You can operate sterilization test of the pneumatic products easily by pressure progression, constant pressure control.
• 5 patterns program is can be input.

＜Use＞

• Cooking, sterilization and heating test of the retort food, canned, beverage cans.
  Heat and pressure resisting・transformation test of the retort pouch, canned, PP vessel and various packaging, etc.

＜Features＞

• Saving coast and realize the multifunction.
• You can select heated-water shower sterilization or steam sterilization. And you can operate various sterilization tests.
• You can operate and check the operation easily by touch panel.
• 5 patterns program is can be input.
• You can set up the temperature・pressure・time in each process. And you can operate test various food・packaging possibly.
• You can select the temperature・time of the cooling process step.
• You can change the pressure settings on the operation by 0.001MPa unit. This function is useful at the vessel's pressure-resisting test.
• You can select the sample temperature sensor or the chamber temperature sensor by sterilization control.
• You can set up 3 step with heating process・cooling process.
• Exterior panels are made of stainless steel, so you can use clean always.
  You can operate equal different control that is operated pressure control automatically from the all process of pneumatic products sterilization.
• You can manage the data by F value indicate function.
• There is no rust or stain of the sample from boiler, because indirect heating by steam coil.
• You can use clean always by stainless steel exterior panels. And piping is kept in the cabinet, so you can use safely without worries about burns, etc.